Remote Promo Sale Product provide drone accessories, flight controller, naza lite Super Offers Ormino G2 Gps Module diy Rc Quadcopter Parts Flight Controller NAZA Lite V1 V2 GPS Module M8N RC Drone Accessories. Get 15% discount Now! Now US $45.03/piece. Hurry buy Now before back to normal price! Normal price US $52.98. Dont waste your time. Buy Now only in China Factories Store Trusted Seller Store!
Product Description:
Using 32-bit processor, compatible with NAZA LITE V1 V2 flight controller, incomparably superior than 8-bit processor. -Coming with soft silicone gel cable 30cm; For softness, black rubber was wrapped on surface. The line order is defined as the interface with the arrow indicator on the side of the GND ground, the farthest from the arrow is the supply line. -Metal foil label has been mounted on the bottom of GPS to reduce signal interference from other electronic equipments.The direction of the arrow to the top of the head GPS directions, please note that when installing. GPS electronic compass calibration using the same method and the original.*: Receiving goods The first thing is to calibrate the electronic compass on the plane, this is very important. Calibration method: the GPS connected to the flight control, and then the remote control mode switch toggle 7-10 times, this time NAZA LED is always orange does not flash, the level of rotation of the aircraft 1 ring, when the LED is green Light does not flash, and then head down the plane 1 turn, this time the LED is normal standby flashing. If the calibration is not successful repeat the above steps can be. Package Includes: Only GPSX 1PCS
Orders do not include NATE
| About Payment: |
| 1.We will shipped the item within 7 days after receive your payment. 2.We will ship it to your leaving address, pleasemake it sure your address is correct. If you want to change your address, please contact us. |
| About Shipment: |
| 1. WORLDWIDESHIPPING. (Except some countries and APO/FPO) |
| 2. We only shipto confirmed order addresses. Your order address MUST MATCH your Shipping address. |
| 3. The images shown are not the actual item and are for your reference only. |
| 4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. |
| Return&Refund: |
| 1.If the item is defective or damaged ,please contact us immediately |
| 2.If the returned items appear, Must be in their original condition( packaging)and must be providing us with the shipping tracking number! |
| About Feedback: |
| 1.We maintain high standards of excellence and strive for 100% customer satisfaction! |
| 2.Please leave positive feedback and 5 stars If you are satisfied with our items and service ,which will be a great encouragement for us! |
| 3.Any problem you can contact us, we will solve the problems until you are satisfied. |
| 4.We sincerely hope that well have more chances to serve you! |
Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Excellent Limited Ormino G2 Gps Module diy Rc Quadcopter Parts Flight Controller NAZA Lite V1 V2 GPS Module M8N RC Drone Accessories
Supported by Aditif Info
APM2.8 Flight Controller + NEO-M8N GPS, 3DR 915Mhz Telemetry, OSD, Power Module APM2.8 Flight Controller (detail instruction please reference this link) - Newest APM version, with Shock Absorber designed - Arduino Compatible - Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer - Onboard 4 MegaByte Dataflash chip for automatic datalogging - One of the first open source autopilot systems to use Invensenses 6 DOF Accelerometer/Gyro MPU-6000. - Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties. - Atmels ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively. - Drawing: //img01.taobaocdn.com/imgextra/i1/664694061/TB2JsClXVXXXXa4XXXXXXXXXXXX-664694061.jpg NEO-M8N GPS & Compass Module (detail instruction please reference this link)- Receiver type 72-channel u-blox M8 engine- Nav. update rate1 Single GNSS: up to 18 HZ- Concurrent GNSS: up to 10 Hz- Assistance AssistNow GNSS Online- OMA SUPL & 3GPP compliant- RTC crystal Built-In- Noise figure On-chip LNA (NEO-M8M). Extra LNA for- Anti jamming Active CW detection and removal. Extra- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)- Supported antennas Active and passive- Uses u-blox M8 chips qualified according to AEC-Q100- Supply voltage 1.65 V to 3.6 V (NEO-M8M)- Backup Supply 1.4 to 3.6 V- TCXO, flash, SAW, LNA,- Timepulse Configurable 0.25 Hz to 10 MHz 3DR 915Mhz Radio Wireless Telemetry Kit (detail instruction please reference this link)- Receiver sensitivity to -121 dBm- Transmit power up to 20dBm (100mW)- Transparent serial link- Air data rates up to 250kbps- MAVLink protocol framing and status reporting- Frequency hopping spread spectrum (FHSS)- Adaptive time division multiplexing (TDM)- Support for LBT and AFA- Configurable duty cycle- Built in error correcting code (can correct up to 25% data bit errors)- Demonstrated range of several kilometers with a small omni antenna- Can be used with a bi-directional amplifier for even more range- Open source firmware- AT commands for radio configuration- RT commands for remote radio configuration- Adaptive flow control when used with APM- Based on HM-TRP radio modules, with Si1000 8051 micro-controller and Si4432 radio module Crius MAVLink-OSD V2.1 (detail instruction please reference this link)·ATMEGA328P Microcontroller·MAX7456-EUI monochrome on-screen display·5V/500mA DC/DC regulator for MAX7456-EUI·Operating voltage: 5V(FTDI connector) and 12V(Video I/O connector)·Supported NTSC & PAL·FTDI connector·Full MAVLink protocol support·Graphical configurator tool Crius Power Module (detail instruction please reference this link)·Input voltage: 6~28V (support 30V)·Max current sensing: 90A·Voltage and current measurement configured for 5V ADC·Switching regulator outputs 5.3V±0.1V and 3A max·6P molex cable plugs directly to APM/Arduflyer 2.5s PM connector Package includes:1x APM2.8 FC with Shock Absorber1x NEO-M8N GPS module1x Crius APM power module1x Crius MAVLink-OSD V2.11x 3DR 915Mhz Radio Wireless Telemetry Kit 1x GPS bracket1x 3DR Telemetry OSD Y Style Connection Cable
Package Includes:(as the main picture) - 1pcs 220mm 4-Axis Carbon Fiber Quadcopter Frame Kit (not assembeled, just a frame kit)- 1pcs F3 6DOF Flight Control Board- 4pcs simonk12A ESC- 4 pcs LHI 2204 motor (2CCW, 2 CW)- 1pcs distribution board- 4pcs motor colver- 4pcs LED- 1set TS5828- 1pcs Mushroom FPV Autenne- 1set FS T6- 4 pairs 5045 propellers (1 pair green , 1 pair black)